86-519-85069186
Sutai Electrical Appliance Co., Ltd., No. 525, Wuyi South Road, Wujin Dist., Changzhou, Jiangsu, China (Mainland)
hybrid servo stepper motor nema 34 closed loop stepper motor 12N.m
| Series Model | Step angel | Motor lengh | Rated Current | Phase Resistance | Phase Inductance | Holding torque | rotor inertia | Lead wire | Motor weight |
| ST86HSS801 | 1.8 | 98 | 5.0 | 0.43 | 3.5 | 4.5 | 1.6 | 4 | 1.7 |
| ST86HSS811 | 1.8 | 98 | 4 | 0.85 | 7.3 | 4.5 | 1.6 | 4 | 2.2 |
| ST86HSS905 | 1.8 | 116 | 5.6 | 0.5 | 4.5 | 7.5 | 2.5 | 4 | 3 |
| ST86HSS1402 | 1.8 | 132 | 6 | 0.4 | 3.6 | 8.5 | 3 | 4 | 3.5 |
| ST86HSS5001 | 1.8 | 168 | 6 | 0.35 | 2.5 | 12 | 4.8 | 4 | 5 |
Driver for 86mm servo stepper motor
ST-HBS860 is 2 phase nema 23, nema 34 series hybrid stepper servo driver. It adopts new generation 32 bit DSP and vector control technology, which can avoid the stepper motor losing steps and ensure the accuracy of the motor. The torque reducing is much lower than open loop stepper motor when it is at higher speed. The high speed performance and torque are enhanced in a great extent. Meanwhile the current control is based on the load, that can reduce the motor temperature rising effectively, then can extend the using life of the motor. The build-in place in position and alarm output signal can help the upper monitor to monitor and control. The function of position ultra difference alarm can ensure the machine work safely. The closed loop system is an ideal improvement and a good replacement of open loop system, Besides that, it also have some function of AC servo motors, but price is just half of AC servo.
1.2 Features
Stepper motor closed loop system, never lose step.
Improve motor output torque and working speed.
Automatic current adjustment based on load, lower temperature rising.
Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need to adjust gain parameter.
Motor work smoothly and low vibration, high dynamic performance at acceleration and deceleration.
No vibration from high speed to zero speed
Drive nema 34 series 4.5N.m - 12N.m closed loop stepper motor.
Pulses response frequency can reach 200KHZ
16 kinds microsteps choice, highest 50000microsteps/rev.
Voltage range: VDC16V~70V
Over-current, over-voltage and position ultra difference protection function.
Applications
Closed loop stepper system can be applied to all kinds small automatic equipment and
Instruments, such as engraving machine, special industrial sewing machine, stripping machine, marking machine, Dispensing machine, cutting machine, laser phototypesetting, graph plotter, NC machine, automatic, assembly equipment and so on.
2. Electrical, mechanical, environment Parameter
2.1 Electrical Parameter
Voltage range | VAC12~70V VDC16-100V |
Peak current | Peak 8.0A(current change according to load) |
Logic input current | 7~20mA |
frequency | 0~200KHz |
Suitable motor | 57HSS SERVO STEPPER MOTOR |
Encoder lines | 2500 |
Insulation resistance | >=500MΩ |
2.2 Environment Parameter
Cooling method | Natural or radiator | |
Operating environment | Operating Occasions | try to avoid dust, oil, corrosion gas |
Operating temprature | 0~50℃ | |
Operating humidit | 40~90%RH | |
virbration | 5.9m/s²Max | |
Storage temperature | -20℃~65℃ | |
Weight | About 560g | |
2.3 Installation Dimension
Standard wire length for encoder is 1 meters. ( Wire length can be customized.)
If you need more information . please contact with us , our contact information:
Changzhou Sutai Electrical Appliance Co.,Ltd
Contact Person :Miss Candise (Sales manager)
Tel: 0086 519 85069186 Fax: 0086 519 85069078
QQ: 744844534
Skype: Candise1991
The best comes from the best understanding!
